Tremendous Industrial Property Opportunity- Knoxville

We don't often use this blog to promote specific properties but this was to good to pass up.   Cushman & Wakefield | Cornerstone is listing an ideal piece of industrial property in the Middlebrook area of Knoxville.  DCP Warehouse recently went under renovations and now has 94,200sft for lease.   

Check out the information below and let me know if you need additional details. 

Tremendous Industrial Property Opportunity

There is no warehouse of this size and type in west Knoxville.  The newly renovated DCP Warehouses are ready for immediate occupancy. 

Ideally located within two miles of both I-640 and I-40, DCP Warehouses has 92,400sft available.  This space can be divided into two 35,000sft bays and a 20,000sft bay.

Renovations: New lighting, dock seals, load levelers.

From a distribution standpoint, Knoxville’s location and easy access to major interstates allows drivers to reach most of the US population in less than a day.  The availability of DCP to get drivers on and off the interstate quickly allows for an even easier transition.

DCP Warehouses are also well appointed for manufacturing.  The buildings power systems can handle any need.

This stand-alone building has the following amenities:
Construction: Tilt-up concrete
Floors: 6-in reinforced concrete
Ceilings: 22ft clear-height
Dock doors: 9 w/load levelers
Drive-in Doors: 2
Parking Spots: 100 (plus the availability for more)
Power: 1000amp, 480 three-phase, 240 single-phase, 208 single-phase
Offices: Multiple
Utilities: City sewer, water, electric, propane, natural gas (available)

See attached flyer for more information.

For more information contact: 
Justin Cazana, CCIM  865-617-2989 / jcazana@cornerstonecres.com

N. Justin Cazana, CCIM
Principal | Broker
Cushman & Wakefield
Cornerstone CRES
6005 Lonas Road, Suite 220
Tel:       (865) 450-8883
Fax:      (865) 450-8953
Mobile:  (865) 617-2989

Industrial Space in the Knoxville Market

Knoxville is a bit different when it comes to the industrial/warehouse/distribution market.  Because of the market’s proximity to so many major interstates, I-40, I-75, I-81 and being so close to major cities like Charlotte, Atlanta, Nashville and Cincinnati, you would expect more of a distribution presence.  But that is not the case.  While there is about 32 million square feet of what would be considered industrial space much of it is dated and not the new high-bay space required by top-flight tenants.

DCP Warehouse- Knoxville, TN

What do you need to look for?  It varies just like retail and office, but functionality often replaces locations on the priority list (as long as the location is not to bad).

Space Attributes

A wide range of storage alternatives, material handling equipment and software exist to meet the operational requirements of a warehouse space type.  Intergration of these features is essential. Warehouse spaces must also be flexible enough to adapt to future operations and storage needs.

Functional / Operational

• Use of Space: Warehouse space types are often designed with higher bays to take advantage of vertical storage. Utilization of space is maximized while providing adequate circulation paths for personnel and material handling equipment such as forklift trucks.
• Power and Utility Requirements: Differentiate between spaces that require power and utilities, and those that are for storage only. Depending on the goods being stored and handling equipment required, there may be a need for well-distributed power and utility lines throughout the space. Attempt energy-efficient lighting when possible. Warehouse spaces typically include one floor drain for every two bays of storage, as well as sand and oil traps on waste lines.
• Loading Dock: Warehouse space types are typically designed with one electro-hydraulic dock leveler per every five truck bays.
• Fire Protection:  New buildings sometime are built with an ESFR sprinkler system that allows each sprinklerhead to put out almost 100 gallons of water per minute!  These are few and far between in Knoxville.  In fact, DCP Warehouse installed Knoxville's first ESFR system in 2008.
• Special HVAC: Provide proper ventilation under all circumstances. Plan for 100% exhaust from storage areas with paint, petroleum, aerosol, or other minor amounts posing moderate hazard storage conditions.

Determine the type of space you’ll need. Have a good grasp on requirements for phone, broadband data service, HVAC, gas, water and electricity. You’ll want enough power to provide adequate lighting and operate necessary equipment. Take all your needs into consideration when looking at space: storage for raw materials and finished product, a production area or assembly line, ceiling height, column spacing, dock-high or drive-in truck access, signage, offices and rest rooms. Think about proximity to freeways for access, as well as public transportation, parking requirements and, possibly, rail access.

Try to develop a preliminary layout that takes into account all aspects of your operations. The layout should include utility connections for each piece of equipment. With this information, you can determine what type and how much space you’ll need.

As far as Knoxville is concerned there are dozens of small/medium warehouses (less than 40,000sft)  available but fewer of the larger size (+40,000sft ).  In fact only seven can be found on the MLS that exceed 80,000sft.  Doesn’t seem like much does it.

For comparison, Columbia, South Carolina (with a metro area only 50,000 more that Knoxville) has three million more square feet of industrial space. Birmingham, Alabama has 123 million square feet of industrial space.

There is space out there.  It just depends on what you are looking for.  Cushman & Wakefield|Cornerstone CRES can help you find it. 865-617-2989 or jcazana@cornerstonecres.com

Resources:  Whole Building Design Guide (WBDG.org), Grubb & Ellis, Graham & Co.